98. Manual Valve Link and Oil Dam Assemble

1. Install the oil dam (27) into the case.
2. Assemble the manual valve link onto the manual shift detent lever/IMS detent lever.





3. Connect the manual valve link (402) to the manual valve (404).
4. Install the manual valve clip (403).

Notice: Refer to Fastener Notice in Service Precautions.





5. Install the manual shift detent assembly (804), and the manual shift detent bolt (805).
^ Tighten the bolt to 11 Nm (97 inch lbs.).





6. Carefully install the input speed sensor (440) into the case cover (400).
7. Install the input speed sensor clip (441) into the case cover (400).