Disarming the CTD System

If system arming has been requested by the power door lock switch or the transmitter, it must be disarmed.

IMPORTANT: Using the power door unlock switch or manually unlocking the doors does not disable the CTD arm mode. Also, disconnecting the battery or pulling fuses does not disable the arm mode, since the RIM stores the CTD mode status in EEPROM.
^ To disarm the CTD system in standby mode (SECURITY indicator flashing and door(s) open):
- Press the power door unlock switch.
- Use the key to unlock the Left front door.
- Press the UNLOCK button on the transmitter.
^ To disarm the CTD system in delayed mode or armed mode:
- Use the key to unlock the Left front door.
- Press the UNLOCK button on the transmitter.