Steering Column Bracket Replacement

Steering Column Bracket Replacement

Removal Procedure

1. Remove the left closeout panel.
2. Remove the knee bolster.




3. Remove the fasteners from the knee bolster bracket at the instrument panel.
4. Remove the fasteners from the knee bolster bracket at the steering column support.




5. Remove the steering column bracket fasteners.
6. Remove the steering column bracket.

Installation Procedure




1. Install the steering column bracket.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the steering column bracket fasteners.

Tighten the fasteners to 9 N.m (80 lb in).




3. Install the knee bolster bracket to the instrument panel.
4. Install the fasteners to the knee bolster bracket at the steering column support.

Tighten the fasteners to 9 N.m (80 lb in).

5. Install the fasteners to the knee bolster bracket at the instrument panel.

Tighten the fasteners to 2 N.m (18 lb in).

6. Install the knee bolster.
7. Install the left closeout panel.