Tilt Head Housing - Disassemble

Disassembly Procedure

- Tools Required
- J23653-SIR Lock Plate Compressor





1. Remove the SIR coil assembly. Refer to Inflatable Restraint Steering Wheel Module Coil -Disassemble - Off Vehicle.
2. Remove the bearing retainer using J23653-SIR and dispose of it.
3. Remove J 23653-SIR from the steering shaft assembly.





4. Remove the shaft lock shield assembly (1).
5. Remove the turn signal cancel cam assembly (2).
6. Remove the upper bearing spring (3).
7. Remove the upper bearing inner race seat (4).
8. Remove the inner race (5).