Instrument Panel (IP) - End Bracket Replacement - Left

Bracket Replacement - Instrument Panel (I/P) End Left

Removal Procedure

1. Remove the IP assembly. Refer to Instrument Panel (I/P) Assembly Replacement (Instrument Panel (IP) - Assembly Replacement) .




2. Remove the fasteners (2) from the left IP end bracket (1) to the A-pillar.
3. Remove the left IP end bracket (1).



Installation Procedure





1. Install the left IP end bracket (1) to the A-pillar.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the fasteners (2) to the left IP end bracket.

Tighten the bracket fasteners to 55 N.m (41 lb ft).

3. Install the IP assembly. Refer to Instrument Panel (I/P) Assembly Replacement (Instrument Panel (IP) - Assembly Replacement) .