Steering Column Bracket Replacement

Steering Column Bracket Replacement

Removal Procedure





1. Disable the SIR system. Refer to Disabling the SIR System.
2. Remove the steering column. Refer to Steering Column Replacement.
3. Remove the 2 fasteners retaining the steering column support bracket (1) to the IP carrier
4. Remove the steering column support bracket.



Installation Procedure





1. Apply LOCTITE(R) 242 on threads of both fasteners.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the bracket (1) to the IP carrier with the fasteners.

Tighten the fasteners to 25 N.m (18 lb ft).

3. Install the steering column. Refer to Steering Column Replacement.
4. Enable the SIR system. Refer to Enabling the SIR System.