Tilt Spring - Disassemble
Disassembly Procedure1. Remove the upper and lower shrouds. Refer to Steering Column Trim Covers - Disassemble - Off Vehicle.
2. Use the tilt lever to tilt the column in the "UP" position.
Caution: The tilt spring and the spring guide are under pressure. The tilt spring and the spring guide may become a projectile. Secure the spring with locking pliers during removal. Secure the spring with locking pliers during installation. Bodily injury may result during removal and installation of the It spring and the spring guide. Always use caution during removal and installation of the tilt spring and the spring guide.
3. Pry the tilt spring (1) up until a bulge occurs and most of the tilt spring (1) tension is removed.
4. Secure the tilt spring (1) and continue prying until the tilt spring (1) disengages from the post on the steering column support assembly (2) and the steering column tilt head assembly (3).
5. Remove the spring guide (1) from the tilt spring (2).