Weatherstrip Replacement - Rear Door Window
REMOVAL PROCEDURE1. Place the window in the full down position.
2. Remove the trim panel.
3. Remove the water deflector.
4. Remove the inner sealing strip.
5. Remove the stationary window molding.
6. Pull the weatherstrip away from the door.
7. Remove the window weatherstrip from the door.
INSTALLATION PROCEDURE
1. Position the window weatherstrip to the door starting in the corner.
Work outward in both directions.
2. Firmly seat the window weatherstrip to the door.
3. Close the window.
4. Inspect the glass in order to ensure the weatherstrip is properly positioned.
5. Install the stationary window molding.
6. Install the inner sealing strip.
7. Install the water deflector.
8. Install the trim panel.