Aiming Headlamps (Visual Aim)
1. Raise the hood.
2. Turn ON the low beam lamps.
3. Inspect the horizontal aim
4. Adjust the aim using the horizontal adjusting screw, to align the left edge of the high intensity zone with the headlamp low beam bulb vertical centerline (1 ), within the range of 102 mm (4 in) to the left (4) of the lamp bulb vertical centerline (1), to 102 mm (4 in) to the right (3) of the lamp bulb vertical centerline (1) on the aiming screen.
5. Inspect the vertical aim.
6. Adjust the aim using the vertical adjusting screw, to align the top edge of the high intensity zone to the headlamp low beam bulb horizontal centerline (2), within the range of 51 mm (2 in) above (6) the lamp bulb horizontal centerline (2), to 64 mm (2.5 in) below (5) the lamp bulb horizontal centerline (2) on the aiming screen.
7. Turn OFF the headlamps.
8. Lower the hood