SIR Steering Wheel Module Coil - Disassemble

Disassembly Procedure
1. Remove the upper and lower shrouds. Refer to Steering Column Trim Covers - Disassemble -Off Vehicle (Column Shift) or Steering Column Trim Covers - Disassemble - Off Vehicle (Floor Shift).





2. Remove the wire harness straps (2) from the steering column and the wire harness assembly (1).
3. Disconnect the SIR coil assembly connector from the turn signal switch assembly connector.





4. Remove the retaining ring (3) from the groove in the steering shaft assembly (2).
5. Remove the SIR coil assembly (4) from the steering shaft assembly (2).