Steering Column Filler
Steering Column Filler ReplacementREMOVAL PROCEDURE
1. Remove the left instrument panel (IP) insulator.
2. Remove the bolts from the bottom of the steering column opening panel.
3. Pull the steering column opening panel rearward and upward, releasing the retaining clips from the IP.
4. Disconnect the electrical connector from the driver information center (DIC), if equipped.
5. Remove the steering column opening panel.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the driver information center (DIC), if equipped.
2. Align the steering column opening panel locating pins and the retaining clips to the slots in the IP.
3. Press the steering column opening panel to lock in the retainers.
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the bolts to the bottom of the steering column opening panel.
Tighten
Tighten the steering column opening panel bolts to 2 Nm (18 lb in).
5. Install the left instrument panel insulator.