Feature Customization - Changing the Last Door Locking Mode

There are two ways to change the last door locking mode:
^ The Tech 2 scan tool method
^ Complete the following steps in order to change the last door locking mode using the Tech 2 scan tool method:
^ At the SELECT SYSTEM screen select BODY.
^ Then select the car line and nameplate.
^ At the APPLICATION MENU screen select PERSONALIZATION.
^ At the next APPLICATION MENU screen select SET OPTIONS.
^ At the next APPLICATION MENU screen select the mode you want.
^ The door lock switch method.

Complete the following steps in order to change the last door closed locking mode using the door lock switch method:
1. Close all of the vehicle doors.
2. Turn the ignition switch to the RUN position.
3. Firmly depress and hold the brake pedal.
4. Press and hold UNLOCK on either door lock switch.
5. Hold UNLOCK and complete the following steps:
^ Shift the transaxle out of PARK.
^ Shift the transaxle back into PARK.
6. Complete the following steps in order to change the last door closed locking mode:
^ Shift the transaxle out of PARK.
^ Shift the transaxle back into PARK.
7. The BCM sounds the chime once when the last door closed locking mode is disabled.
The BCM sounds the chime twice when the last door closed locking mode is enabled.
Release the door lock switch when you obtain the desired mode. Releasing the switch will exit and save the current customization mode.

The last door closed locking mode is enable when the vehicle was manufactured. Disconnecting the vehicle battery for up to a year will not change the mode.