Range Selector Cable Bracket Replacement

Removal Procedure





1. Remove the throttle body air inlet duct. Refer to Air Cleaner Assembly Replacement in Powertrain Management.
2. Remove the range selector cable of the automatic transaxle (A/T) from the A/T range selector lever.





3. Remove the A/T range selector cable from the A/T range selector cable bracket.





4. Remove the A/T range selector cable bracket bolts.
5. Remove the A/T range selector cable bracket.

Installation Procedure





1. Install the A/T range selector cable bracket.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the A/T range selector cable bracket bolts.
Tighten
Tighten the A/T range selector cable bracket bolts to 25 Nm (18 ft. lbs.).





3. Install the A/T range selector cable to the bracket.





4. Install the A/T range selector cable to the A/T range selector lever.
5. Adjust the A/T range selector cable if necessary. Refer to Automatic Transmission Range Selector Cable Adjustment.
6. Install the throttle body air inlet duct. Refer to Air Cleaner Assembly Replacement in Powertrain Management.