Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2001 >> Century V6-3.1L VIN J >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Idle Speed/Throttle Actuator - Electronic >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Idle Speed/Throttle Actuator - Electronic: Service and Repair

IDLE AIR CONTROL (IAC) VALVE REPLACEMENT

REMOVAL PROCEDURE




1. Turn OFF the ignition.
2. Remove the EVAP purge valve.
3. Disconnect the electrical connector from the idle air control (IAC) valve.




4. Remove the 2 screws that retain the IAC valve.




5. Remove the idle air control valve.




6. Remove the O-ring from the idle air control valve.

INSTALLATION PROCEDURE

NOTE: The IAC valve may be damaged if installed with the cone (pintle) extended more than 28 mm (1-1/8 in). Measure the distance that the valve is extended before installing a new valve. The distance from the idle air control valve motor housing to the end of the idle air control valve pintle should be less than 28 mm (1-1/8 in). Manually compress the pintle until the extension is less than 28 mm (1-1/8 in).




1. Install a new O-ring to the IAC valve.




2. Install the IAC valve in the intake manifold.

NOTE: Refer to Fastener Notice in Service Precautions.




3. Install the 2 screws that retain the IAC valve.

Tighten
Tighten the screws to 3.0 N.m (27 lb in).




4. Connect the electrical connector to the idle air control valve.
5. Install the EVAP purge valve.
6. Turn the ignition ON for 10 seconds, then OFF for 5 seconds in order to reset the IAC valve.
7. Start the engine and allow the engine to reach a normal operating temperature.
pro multis · About Operation CHARM