Maintenance Indicator Reset

After changing the engine oil, the system must be reset. To reset the CHANGE ENGINE OIL message use one of the following procedures:

Using the RDS Radio (If Equipped)

1. Turn the ignition to ACC or ON, with the radio off.

2. Press and hold the DISP button on the radio for at least five seconds until SETTINGS is displayed.

3. Press the SEEK up or down arrow to scroll through the main menu.

4. Scroll until OIL LIFE appears on the display.

5, Press the PREV or NEXT button to enter the submenu. RESET will be displayed.

6. Press the DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second.

7. Once the message has been reset, scroll until EXIT appears on the display.

8. Press the DISP button to exit programming. A chime will be heard to verify the exit.