Interior Moulding / Trim: Service and Repair
Coat Hook Replacement
Removal Procedure
1. Unsnap the plastic cover in order to expose the coat hook (1) screw.
2. Remove the coat hook screw.
3. Remove the coat hook and bezel (2) from the headliner.
Installation Procedure
1. Position the coat hook and bezel (2) to the headliner.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the coat hook (1) screw.
Tighten the screw to 2 N.m (18 lb in).
3. Snap the plastic cover over the coat hook screw.