Coolant Level Sensor: Service and Repair

Coolant Level Module Replacement

Removal Procedure
1. Remove the battery.
2. Partially drain the cooling system.





3. Disconnect the coolant level sensor electrical connector.

Important: In order to unlock the coolant level sensor, lift one leg of the snap clip from its locked position and pull outward with a slight twisting motion.

4. Remove the coolant level sensor.

Installation Procedure
1. Lubricate the O-ring seal with coolant.
2. Place the snap clip leg in place.





3. Install the coolant level sensor.
4. Connect the coolant level sensor electrical connector to the coolant level sensor.
5. Fill the cooling system.
6. Install the battery.