Console Replacement - Overhead
Console Replacement - Overhead (Rendezvous)
Removal Procedure
1. Open the garage door panel from the overhead console.
2. Remove the screws from the overhead console.
3. Disconnect the electrical connectors.
4. Remove the overhead console from the vehicle.
Installation Procedure
1. Connect the electrical connectors.
2. Install the overhead console to the vehicle.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the overhead console screws.
Tighten the screws to 2 N.m (18 lb in).
4. Close the garage door panel on the overhead console.