Fastener Tightening Specifications

Cylinder Head Bolt
First Pass 60 Nm 44 ft. lbs.
Final Pass 95 degrees
Cylinder Head Deck Height 224 mm (8.819 inch)
Cylinder Head Deck Surface Flatness 0.05 mm (per 152 mm (0.002 inch) per 6 inch)
Valve Lifter Bore Diameter 21.417-21.455 mm (0.843-0.845 inch)
Combustion Chamber Depth - at Measurement Point 2.2 mm (0.087 inch)
Surface Finish - Maximum 2.8 RA Surface Flatness - Block Deck; 0.08 mm [per 152 mm (0.003 inch) per 6 inch]
Surface Flatness - Exhaust Manifold Deck 0.1 mm (0.004 inch)
Surface Flatness - Intake Manifold Deck 0.1 mm (0.004 inch)
Valve Guide Bore - Exhaust 8.01 mm (0.315 inch)
Valve Guide Bore - Intake 8.01 mm (0.315 inch)
Valve Guide Installed Height 16.6 mm (0.654 inch)