Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2005 >> LeSabre V6-3.8L VIN K >> Repair and Diagnosis >> Testing and Inspection >> Programming and Relearning >> Instrument Panel Module (IPM) - Programming and Setup
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Instrument Panel Module (IPM) - Programming and Setup



INSTRUMENT PANEL MODULE PROGRAMMING AND SETUP

Each of the following service procedures may require programming or setup procedures to be performed on the HVAC Module, instrument panel integration module (IPM) or HVAC actuators.

Instrument Panel Integration Module (IPM) Replacement
If the IPM is replaced, an automatic Re-Calibration of all the actuators will occur. For the best Re-calibration results, start and run the engine for at least 1 minute after installing the new module. Do not adjust any controls on the HVAC control module during the Re-Calibration procedure. If interrupted, improper HVAC performance may result. No additional procedures are necessary.

Instrument Panel Integration Module (IPM) Reprogramming
Do not reprogram the IPM unless directed by a service procedure or a service bulletin.

Reprogram IPM - Refer to Service Programming System (SPS).

Actuator Replacement
If an actuator is replaced, the following procedure must be performed
1. Re-Calibrating Actuators - Refer to Re-Calibrating Actuators in HVAC Systems - Manual.
2. Re-Calibrating Actuators - Refer to Re-Calibrating Actuators in HVAC Systems - Automatic.
pro multis · About Operation CHARM