Power Trunk / Liftgate Lock Switch: Service and Repair

REAR COMPARTMENT LID AJAR SWITCH REPLACEMENT

REMOVAL PROCEDURE




1. Open the rear compartment.
2. Remove the rear compartment lid latch.
3. Remove the screw (5) from the rear compartment lid ajar/lid lamp switch.
4. Remove the electric connector.
5. Remove the rear compartment lid ajar/lid lamp switch.

INSTALLATION PROCEDURE




1. Position the rear compartment lid ajar switch to the rear compartment lid latch.
2. Install the electric connector.
3. Install the screw (5) to the rear compartment lid ajar/lid lamp switch.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the rear compartment lid ajar switch screw to 5 N.m (44 lb in).

4. Install the rear compartment lid latch.
5. Close the rear compartment.