Bracket Replacement - Console Floor

BRACKET REPLACEMENT - CONSOLE FLOOR

REMOVAL PROCEDURE
1. Remove the front floor console.
2. Disconnect the console electrical center from the floor-console bracket and move aside, out of the way.
3. Remove the floor shift control.



4. Remove the upper bolts (2) from the instrument panel (I/P).
5. Remove the lower nuts (1) from the floor.
6. Remove the front floor console bracket from the floor.

INSTALLATION PROCEDURE




1. Align the front floor console bracket to the floor.
2. Install the lower nuts (1) to the front floor console bracket.

NOTE: Refer to Fastener Notice.

Tighten the nuts to 10 N.m (89 lb in).

3. Install the upper bolts/screws (2) to the I/P.

Tighten the bolts/screws to 2.5 N.m (22 lb in).

4. Install the floor shift control.
5. Install the console electrical center to the original location.
6. Install the front floor console.