Sunshade Replacement

SUNSHADE REPLACEMENT

REMOVAL PROCEDURE




1. Release the sunshade from the anchor attachment.
2. Remove the sunshade screw from the headliner.
3. Disconnect the electrical connector from the sunshade.
4. Remove the sunshade.

INSTALLATION PROCEDURE
1. Connect the electrical connectors to the sunshade.




2. Install the sunshade to the headliner with screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).

3. Install the sunshade to the anchor attachment.