Luggage Carrier Rivnut Replacement

LUGGAGE CARRIER RIVNUT REPLACEMENT

REMOVAL PROCEDURE
1. Remove the luggage carrier.



2. Drill through the luggage carrier rivnut head using a 7.5 mm (0.295 in) drill bit.

CAUTION: Refer to Safety Glasses Caution in Service Precautions.

3. Remove the rivnut from the roof.

INSTALLATION PROCEDURE
1. Using a 10 mm (0.3937 in) drill bit, drill the rivnut hex shape hole in the roof out to a round 10 mm hole.




2. Install a replacement rivnut to the hole in Sunroof/Moonroof using a rivnut tool, or equivalent.
3. Install the luggage carrier.