Engine Oil: Service and Repair

Engine Oil and Oil Filter Replacement
Removal Procedure





1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Place a drain pan under the oil pan drain plug.
3. Remove the oil pan drain plug. Allow the oil to drain completely.

Notice: Refer to Fastener Notice in Service Precautions.

4. Install the oil pan drain plug.
Tighten the drain plug to 26 Nm (19 ft. lbs.).





5. Place the drain pan under the oil filter.
6. Remove the oil filter. Allow the oil to drain completely.

Installation Procedure





1. Lubricate the NEW oil filter gasket with clean engine oil.
2. Tighten the oil filter.
Tighten the filter to 30 Nm (22 ft. lbs.).
3. Lower the vehicle.
4. Fill the engine with oil to the appropriate mark.
5. Start the engine and inspect for leaks.