Scan Tool Data Definitions

Scan Tool Data Definitions

BCM Scan Tool Data Definitions

The BCM Scan Tool Data Definitions contains a brief description of all Lighting System related BCM parameters available on the scan tool.

Cruise Control Data List
Stop Lamp Signal
- The scan tool displays ON/OFF. When the PCM detects the stop lamps are applied, the scan tool will display ON.

BCM Data List
Brake Apply Sensor
- The scan tool displays volts. The voltage level varies as the brakes are applied.

BCM Inputs
Flash to Pass
- The scan tool displays ON/OFF. When the multifunction switch is placed on the FTP position, the scan tool will display ON.

Front Fog Lamp Switch
- The scan tool displays ON/OFF. When the fog lamp switch is placed in the ON position, the scan tool will display ON.

Hazard Switch Signal
- The scan tool displays ON/OFF. When the hazard switch is placed in the ON position, the scan tool will display ON.

Headlamp OFF Switch
- The scan tool displays ON/OFF. When the headlamp switch is placed in the OFF position, the scan tool will display ON.

High Beam Switch
- The scan tool displays ON/OFF. When the headlamp dimmer switch is placed in the HIGH position, the scan tool will display ON.

Interior Light Switch
- The scan tool displays ON/OFF. When the interior light switch is placed in the DOME position, the scan tool will display ON.

Interior Lights Power
- The scan tool displays ON/OFF. When the interior lamps switch has voltage applied, the scan tool will display ON.

Left Turn Signal
- The scan tool displays ON/OFF. When the turn signal switch is placed in the LEFT turn position, the scan tool will display ON.

Low Beam Switch
- The scan tool displays ON/OFF. When the headlamp dimmer switch is placed in the LOW position, the scan tool will display ON.

LR Door Open Switch
- The scan tool displays ON/OFF. When the LR door is open, the scan tool will display ON.

Park Brake Switch
- The scan tool display ON/OFF. When the park brake is applied, the scan tool will display ON.

Park Lamp Switch
- The scan tool displays ON/OFF. When the headlamp switch is in the PARK position, the scan tool will display ON.

RF Door Lock Switch
- The scan tool displays ON/OFF. When the RF door is open, the scan tool will display ON.

RR Door Open Switch
- The scan tool displays ON/OFF. When the RR door is open, the scan tool will display ON.

Right Turn Signal
- The scan tool displays ON/OFF. When the turn signal switch is placed in the right turn position, the scan tool will display ON.

BCM Outputs
Backup Lamps
- The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the backup lamps are turned ON.

Brake Applied Outputs
- The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the brake pedal is applied.

Front Fog Lamp Relay
- The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the fog lamps are turned ON.

Instrumentation Backlight
- The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the I/P lamps are commanded ON by the BCM.

Interior Lamp Output
- The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the interior lamps are turned ON.

LF Turn/DRL Lamp Status
- The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the left turn signal is turned ON or when the BCM turns ON the DRL lamps.

LR Stop/Turn Signal Lamp
- The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the left turn signal is turned ON or when the brakes are applied.

Low Beam Relay Command
- The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the low beam headlamps are turned ON.

Park Lamp Relay
- The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the park lamps are turned ON.

RF Turn/DRL lamp Status
- The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the right turn signal is turned ON or when the BCM turns ON the DRL lamps.

RR Stop/Turn Signal Lamp
- The scan tool displays ON/OFF. This output of the BCM is displayed as ON when the right turn signal is turned ON or when the brakes are applied.

BASS Data List
BASS High During Learn
- The scan tool displays NO/YES. If a short to battery positive voltage is detected in the stop lamp switch signal circuit during calibration, then the scan tool will display YES.

BASS Learned
- The scan tool displays NO/YES. When the brake pedal position sensor has been calibrated correctly, the scan tool will display YES.

BASS Low During Learn
- The scan tool displays NO/YES. If a short to ground is detected in the stop lamp switch signal circuit during calibration, then the scan tool will display YES.

BASS Moved During Learn
- If the brake pedal is moved during calibration, the scan tool will display YES.

BASS Valid
- The scan tool displays NO/YES. When the brake pedal position sensor has been calibrated correctly, the scan tool will display YES.

Brake Lamp
- The scan tool displays ON/OFF. When the brake is applied the scan tool will display ON.

Current Position
- The scan tool displays COUNTS. The brake pedal position sensor applies a varying voltage to the BCM. The BCM then calculates the current position of the brake pedal.

Learned Home Position
- The scan tool displays COUNTS. The BCM displays the home position of the brake pedal position sensor.

Learn in Progress
- The scan tool displays NO/YES. When the brake pedal position sensor is being calibrated, the scan tool will display YES.