Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2008 >> Lucerne V8-4.6L >> Repair and Diagnosis >> Transmission and Drivetrain >> Flex Plate >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Flex Plate: Service and Repair



Engine Flywheel Replacement

Tools Required
* J 45059 Angle Meter
* J 44214 Flywheel Holder


Removal Procedure




1. Remove the transaxle. Refer to Transmission Replacement (Removal and Replacement).
2. Install the J 44214 to the engine block.




3. Loosen the flywheel bolts.
4. Remove all but one of the flywheel bolts, leaving the one bolt at the top of the crankshaft.
5. Grasp the engine flywheel with one hand and remove the remaining bolt. Do not drop the engine flywheel when removing the final bolt.
6. Clean and inspect the engine flywheel. Refer to Engine Flywheel Cleaning and Inspection (Overhaul).


Installation Procedure




1. Apply sealant to the flywheel bolts. Refer to Adhesives, Fluids, Lubricants, and Sealers (Specifications).
2. Place the engine flywheel in position against the crankshaft.

Notice: Refer to Fastener Notice (Fastener Notice).

3. Install the flywheel bolts.

* Tighten the bolts a first pass to 30 N.m (22 lb ft).
* Tighten the bolts a final pass an additional 50 degrees using the J 45059.





4. Remove the J 44214 from the engine block.
5. Install the transaxle. Refer to Transmission Replacement (Removal and Replacement).

pro multis · About Operation CHARM