Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2009 >> LaCrosse V6-3.8L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor: Service and Repair




Camshaft Position Sensor Replacement

Removal Procedure

1. Remove the coolant recovery reservoir. Refer to Coolant Recovery Reservoir Replacement (L26) (Service and Repair)Coolant Recovery Reservoir Replacement (LS4) (Service and Repair).
2. Remove the drive belt. Refer to Drive Belt Replacement (L26) (Service and Repair).




3. Disconnect the electrical connector (2) from the camshaft position sensor (1).

Camshaft Position Sensor:




4. Remove the camshaft position sensor bolt.
5. Remove the camshaft position sensor from the engine front cover.

Installation Procedure

1. Install the camshaft position sensor to the engine front cover.





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the camshaft position sensor bolt.

Tighten the bolt to 10 Nm (89 lb in).

3. Connect the electrical connector (2) to the camshaft position sensor (1).
4. Install the drive belt. Refer to Drive Belt Replacement (L26) (Service and Repair).
5. Install the coolant recovery reservoir. Refer to Coolant Recovery Reservoir Replacement (L26) (Service and Repair)Coolant Recovery Reservoir Replacement (LS4) (Service and Repair).

pro multis · About Operation CHARM