Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2010 >> Lucerne V6-3.9L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Oil Pressure Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oil Pressure Sensor: Service and Repair




Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure




1. Remove the oil pressure sensor heat shield nut and shield.




2. Disconnect the engine oil pressure sensor electrical connector (1).




3. Remove the engine oil pressure sensor.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the engine oil pressure sensor.

Tighten the sensor to 16 Nm (12 lb ft).




2. Connect the engine oil pressure sensor electrical connector (1).




3. Install the oil pressure sensor heat shield and nut.

Tighten the nut to 10 Nm (89 lb in).

pro multis · About Operation CHARM