Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2012 >> Verano L4-2.4L >> Repair and Diagnosis >> Maintenance >> Wheels and Tires >> Wheel Bearing >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wheel Bearing: Service and Repair




Front Wheel Bearing and Hub Replacement

Special Tools

EN-45059 - Torque Angle Sensor Kit

For equivalent regional tools, refer to Special Tools Front Suspension.

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Standard) Service and Repair.

2. Remove the brake rotor. Refer to Front Brake Rotor Replacement Front Brake Rotor Replacement.





3. Remove the wheel speed sensor screw (2).

4. Remove the wheel speed sensor (1) from the steering knuckle.

5. Remove the wheel drive shaft from the front wheel bearing/hub. Refer to Front Wheel Drive Shaft Replacement - Left Side Front Wheel Drive Shaft Replacement - Left Side and/or Front Wheel Drive Shaft Replacement - Right Side Front Wheel Drive Shaft Replacement - Right Side.





6. Remove and DISCARD the front wheel bearing/hub bolts (1).





7. Remove the front wheel bearing/hub (1) and front brake shield (2) from the steering knuckle.

Installation Procedure





1. Position the front brake shield (2) and front wheel bearing/hub (1) assembly in the steering knuckle.





Warning:
Refer to Torque-to-Yield Fastener Warning Torque-to-Yield Fastener Warning.


Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the NEW front wheel bearing/hub bolts (1).

3. Tighten the bearing/hub bolts (1) in 3 passes. Use the EN-45059 - angle meter.

* First pass to 90 Nm (66 lb ft)

* Second pass to 60°

* Third pass to 15°

4. Install the wheel drive shaft at the front wheel bearing/hub. Refer to Front Wheel Drive Shaft Replacement - Left Side Front Wheel Drive Shaft Replacement - Left Side or Front Wheel Drive Shaft Replacement - Right Side Front Wheel Drive Shaft Replacement - Right Side.





5. Install the wheel speed sensor (1) to the steering knuckle.

6. Install the wheel speed sensor screw (2) and tighten to 6 Nm (53 lb in).

7. Install the brake rotor. Refer to Front Brake Rotor Replacement Front Brake Rotor Replacement.

8. Lower the vehicle.

pro multis · About Operation CHARM