Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2012 >> Verano L4-2.4L >> Repair and Diagnosis >> Starting and Charging >> Battery >> Battery Current Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Battery Current Sensor: Service and Repair




Battery Current Sensor Replacement

Removal Procedure

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection Battery Negative Cable Disconnection and Connection.





2. Remove the negative cable nut (1).

3. Remove the negative cable (2).





4. Disconnect the wiring harness current sensor plug (4).

5. Remove the current sensor (5) from the battery tray.





6. Remove the current sensor (2) from the battery negative cable (1).

Installation Procedure





1. Install the current sensor (2) at the battery negative cable (1).





2. Install the current sensor (5) at the battery tray.

3. Connect the wiring harness current sensor plug (4).





4. Install the negative cable (2).

Caution:
Refer to Fastener Caution Fastener Caution.

5. Install the negative cable nut (1) and tighten to 9 Nm (80 lb in).

6. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection Battery Negative Cable Disconnection and Connection.

pro multis · About Operation CHARM