| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| Add Following Operations If Performed With Piston & Ring Jobs |
| Main Bearings, Renew | 1.2 | 0.0 | A | Add The Following Operation If Performed Along With Piston & Ring Job |
| Crankshaft, Renew | 3.0 | 0.0 | A | Add The Following Operation If Performed Along With Piston & Ring Job |
| Oil Pump, Renew | 0.2 | 0.0 | A | Add The Following Operation If Performed Along With Piston & Ring Job |
| Oil Pump Screen, Clean | 0.2 | 0.0 | A | Add The Following Operation If Performed Along With Piston & Ring Job |
| Rear Main Oil Seal, Renew | 0.7 | 0.0 | A | Add The Following Operation If Performed Along With Piston & Ring Job |
| Timing Chain or Gears, Renew | 1.5 | 0.0 | A | Add The Following Operation If Performed Along With Piston & Ring Job |
| Tune-Up | 0.7 | 0.0 | A | See Valves Grind Head Removed & Combinations. |
| Right Bank | 12.5 | 9.5 | A | Includes: R&R Cylinder Heads, Oil Pan & Plastigage Bearings. |
| Left Bank | 12.5 | 9.5 | A | Includes: R&R Cylinder Heads, Oil Pan & Plastigage Bearings. |
| Both Banks | 17.8 | 13.8 | A | Includes: R&R Cylinder Heads, Oil Pan & Plastigage Bearings. |