Inside Remote Handle

Inside Remote Handle:

REMOVE OR DISCONNECT
1. Trim panel.
2. Water deflector.
3. Rivets by first center punching a depression in head of rivet, then drilling out rivet using a 4.8 mm (3/16") drill bit.
4. Inside remote handle by sliding rearward to disengage tabs on handle from slots in door.

INSTALL OR CONNECT
1. Inside remote handle by placing tabs on handle into slots in door and sliding handle forward.
2. Rivets using 3/16" peel type rivets.
3. Water deflector.
4. Trim panel.