Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Keyless Entry Transmitter: Service and Repair






PROGRAMMING PROCEDURE
Do the following when replacing Keyless Entry Module or either transmitter.

1. Turn Ignition Switch to OFF.

2. Jumper ALDL connector terminal G (PPL/WHT) to terminal A (BLK/WHT). Door locks lock and unlock, and trunk release activates in approximately 2 seconds.

3. Press any button on one transmitter. Door locks lock and unlock, and trunk release activates in approximately 2 seconds. The first transmitter is now programmed.

4. Repeat step 3 using the other transmitter. If only one transmitter is being used, go to step 5.

5. Disconnect jumper from ALDL connector.