Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal

Liquid Line Filter Installation:






REMOVE OR DISCONNECT
1. Refrigerant.
- Discharge system and recover refrigerant. Refer to Service and Repair / Discharging and Evacuating System. Service and Repair
2. Select and mark the most convenient location for filter (61) on tube assembly (65) between condenser assembly outlet tube and evaporator inlet port connection at the cowl.
3. Tube assembly (65).
- Cap or tape open lines at evaporator inlet port and condenser assembly outlet fitting to prevent dirt or moisture contamination.
4. Original expansion tube.
- Discard expansion tube.
5. Tubing segment for filter installation.
- Remove 70 mm (2.75 inches) of tubing at point selected for filter installation.
- Cut end of tube square with a sharp tubing cutter.
- Cut out internal burr, being sure no shavings remain in two parts of tube that will be reused.