Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Control Module: Service and Repair

Distributor Disassembly, Test And Reassembly - Part 3 Of 3:






REMOVE OR DISCONNECT
1. Distributor cap.
2. Distributor rotor.
3. ICM attaching screws. Lift shield and ICM up.
4. Leads from ICM.

CAUTION: Do not wipe grease from ICM or distributor base if same ICM is to be replaced. If a new ICM is to be installed, a package of silicone grease will be included with it. Spread the grease on the metal face of the ICM and on the distributor base where the ICM seats. This grease is necessary for ICM cooling.

INSTALL OR CONNECT
1. Leads to ICM.
2. ICM shield and module attaching screws.
3. Distributor rotor.
4. Distributor cap.