Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Alternator: Service and Repair

Alternator Mounting:






REMOVE OR DISCONNECT
1. Negative battery cable.
2. Alternator harness connector and battery charging wire on back of alternator. Heated windshield 3-phase connector and clip if equipped.
3. Release tension from drive belt and remove belt from alternator pulley. Do not remove belt from any other component pulleys.
4. Bolts, ABS ground strap, and alternator from vehicle.

INSTALL OR CONNECT
1. Alternator and ground strap to mounting bracket with bolts. Tighten bolts to 27 Nm (20 lb ft).
2. Raise drive belt tensioner. Position drive belt over alternator pulley and release tensioner. Drive belt routing diagram is mounted on the right strut tower in the engine compartment for reference purposes.
3. Alternator harness connector and battery charging wire to alternator output stud. Do not route battery charging wire so as to rest against cruise control servo. Tighten to 20 Nm (15 lb ft).
4. Negative battery cable and tighten bolt to 15 Nm (11 lb ft).