Remote Function Actuator

IMPORTANT: The Remote Function Actuator system controls the door locks of the vehicle. It is therefore imperative to retain a door key outside the vehicle to eliminate any possibility of being locked out of the vehicle.

RFA MODULE

RFA Receiver Module Mounting Location:

Remove or Disconnect
1. Rear Electronics Bay Board.
2. Wiring harness connection.
3. RFA receiver module from left side of electronics bay board by pressing on locking tabs.

Install or Connect
1. RFA receiver module onto electronics bay board.
2. Wiring harness connection
3. Electronics Bay Board.
4. Reprogram Transmitters.