Frontal SIR System Install or Connect

Important
^ The following procedures should be utilized in the event that the inflatable restraint Sensing and Diagnostic Module (SDM) mounting fasteners are damaged to the extent that the SDM can no longer be properly mounted.

Install or Connect
1. The SDM to the vehicle, ensure arrow is pointing toward the front of the vehicle.
2. The SDM fasteners.

Tighten
^ Fasteners to 11 N.m (98 lb. in.).
3. The electrical connector and CPA.
4. The carpet and insulation.
5. The front seat.
6. The LH front sill plate.
^ Enable the Frontal SIR system, refer to Enabling the Frontal SIR System.

Tighten
Fasteners to 11 N.m (98 lb. in.).