Ambient Temperature Sensor / Switch HVAC: Service and Repair

Removal Procedure

Caution: To help avoid personal injury when a vehicle is on a hoist, provide additional support for the vehicle at the opposite end from which components are being removed. This will reduce the possibility of the vehicle falling off the hoist.

1. Raise and support the vehicle.
2. Remove the temperature sensor located on the lower grille on the front fascia on the left side of the vehicle.
3. Disconnect the electrical connection from the sensor.
4. Remove the temperature sensor.

Installation Procedure

1. Install the temperature sensor.
2. Connect the electrical connection to the sensor.
3. Install the temperature sensor to the lower grille on the front fascia on the left side of the vehicle.
4. Lower the vehicle.