Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Steering Wheel Inflator Module

REMOVAL PROCEDURE

CAUTION: Always disable the Supplemental Inflatable Restraint (SIR) system when servicing the SIR components, or the SIR wiring. Failure to follow the disabling procedures could result in possible deployment, personal injury or otherwise unneeded SIR system repairs.

1. Disable the SIR system.








2. Remove the Torx(R) screws from the back of the steering wheel.
3. Disconnect the inflatable restraint steering wheel module connector.
4. Remove the inflatable restraint steering wheel module.

INSTALLATION PROCEDURE

CAUTION: When you are carrying an undeployed inflator module:
^ Do not carry the inflator module by the wires or connector on the inflator module.
^ Make sure the bag opening points away from you.
When you are storing an undeployed inflator module, make sure the bag opening points away from the surface on which the inflator module rests. When you are storing a steering column, do not rest the column with the bag opening facing down and the column vertical. Provide free space for the air bag to expand in case of an accidental deployment. Otherwise, personal injury may result.


1. Install the module.
2. Connect the module electrical connector.
3. Install the Torx(R) screws.
^ Tighten the screws to 8 Nm (72 lb in).

4. Enable the SIR system.