Steering Wheel Control Switch Assembly

REMOVAL PROCEDURE
1. Disable the SIR system. Refer to Disabling the SIR SYSTEM in RESTRAINTS.
2. Remove the inflatable restraint steering wheel module. Refer to STEERING WHEEL INFLATOR MODULE REPLACEMENT.
3. Remove the screws retaining the steering wheel switches in place.
4. Disconnect the electrical connection and remove the steering wheel control switch.





INSTALLATION PROCEDURE
1. Connect the electrical connection to the switch.
2. Install the steering wheel control switch.
3. Install the inflatable restraint steering wheel module. Refer to STEERING WHEEL INFLATOR MODULE REPLACEMENT.
4. Enable the SIR system. Refer to Enabling the SIR SYSTEM in RESTRAINTS.