Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 1998 >> Seville STS V8-4.6L VIN 9 >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Speed Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Speed Sensor: Service and Repair

REMOVAL PROCEDURE





1. Disconnect the negative battery cable. Refer to Battery Disconnect Caution in Service Precautions.
2. Raise the vehicle. Refer to Vehicle Lifting.
3. Remove the electrical connector at the Vehicle Speed Sensor (VSS).
4. Remove the retaining bolt (131) and the sensor (130).

INSTALLATION PROCEDURE





1. Install the Vehicle Speed Sensor (VSS) (130) and the retaining bolt (131).
^ Tighten the bolt to 10 Nm (89 inch lbs.).

NOTICE: Refer to Fastener Notice in Service Precautions.

2. Install the electrical connector at the sensor.
3. Remove the safety stands.
4. Lower the vehicle.
5. Connect the negative battery cable. Refer to Battery Disconnect Caution in Service Precautions.
^ Tighten the terminal bolt to 15 Nm (11 ft. lbs.).

pro multis · About Operation CHARM