Rear

Rotor Refinishing Specifications Ammco Brake Lathe Rough Cut
Spindle Speed 150 rpm
Depth Of Cut (Per Side) 0.15 To 0.64 mm (0.006 inch To 0.025 inch)
Tool Crossfeed (Per Rev.) 0.25 mm (0.010 inch)
Vibration Dampener Yes
Sand Brake Rotor (Swirl Pattern) No
Finish Cut
Spindle Speed 150 rpm
Depth Of Cut (Per Side) 0.10 To 0.15 mm (0.004 inch To 0.006 inch)
Tool Crossfeed (Per Rev.) 0.05 mm (0.002 inch)
Vibration Dampener Yes
Sand Brake Rotor (Swirl Pattern) Yes

Accuturn Brake Lathe Single Cut Refinishing
Spindle Speed 105 rpm
Depth Of Cut As Necessary
Tool Crossfeed (Per Rev.) 0.08 mm (0.003 inch)
Vibration Dampener Yes