Component Specifications

DISC BRAKE SPECIFICATIONS (FRONT)
Disc Brake Pad Material Semi-metallic, Non-asbestos
Disc Brake Pad Wear Sensor Electronic
Brake Lining with Lining Plate;
New (Approximate) 17.5 ± 0.6 mm (0.688 ± 0.023 in.)
Used (Minimum) 8.0 mm (0.315 in.)
Brake Lining Taper (Maximum) 0.15 mm (0.006 in.)
Brake Caliper Type Single Piston, Sliding Caliper
Caliper Bore Diameter 57.0 mm (2.244 in.)
Brake Rotor Type Vented
Diameter (Nominal) 296 mm (11.653 in.)
Maximum Lateral Runout;
Rotor Installed 0.16 mm (0.004 in.)
Rotor Removed 0.04 mm (0.001 in.)
Thickness (New) 28 mm (1.102 in.)
Maximum Thickness Variation 0.02 mm (0.0005 in.)
Minimum Thickness after Refinish 26.5 mm (1.043 in.)
Discard Thickness 25 mm (0.984 in.)

NOTE: All front brake rotors have a discard dimension cast in them. This is a wear dimension and not a refinish dimension. Any brake rotor which does not meet the specification should be replaced.