Operation CHARM: Car repair manuals for everyone.
Home >> Cadillac >> 1999 >> Escalade V8-5.7L VIN R >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Timing Ring >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Timing Ring: Service and Repair

CRANKSHAFT POSITION (CKP) RELUCTOR RING REPLACEMENT

REMOVAL PROCEDURE





1. Disconnect the Negative Battery Terminal.
2. Remove the engine front cover. Service and Repair
3. Remove the crankshaft position sensor reluctor ring.

INSTALLATION PROCEDURE

NOTICE: Failure to properly align the crankshaft position sensor reluctor ring may result in component damage and effect OBD 11 system performance.

IMPORTANT: The reluctor ring is shaped like a dish. The dish must face the engine front cover. Failure to do so will damage the engine front cover and the reluctor ring.





1. Install the crankshaft position sensor reluctor ring.
2. Align the keyway on the crankshaft position sensor reluctor ring with the woodruff key (crankshaft balancer) in the crankshaft.
3. Push the crankshaft position sensor reluctor ring onto the crankshaft until completely seated against the crankshaft sprocket.
4. Install the engine front cover. Refer to Engine Front Cover Replacement.
5. Install the Negative Battery Terminal. Refer to Battery Cable in Powertrain Management.
pro multis · About Operation CHARM