Keyless Entry Receiver: Service and Repair

Remote Control Door Lock Receiver Replacement




REMOVAL PROCEDURE
1. Remove the rear shelf trim from inside of the rear storage compartment.
2. Push on the retainer at the rear edge of the bracket and slide towards the driver's side.
3. Disconnect the electrical connectors from modules on the bracket.
4. Remove the RKE module (1) from the bracket (2).

INSTALLATION PROCEDURE
1. Slide the RKE module (1) into the bracket (2).
2. Reconnect all the electrical connectors.
3. Install the bracket to the rear shelf.
4. Install the rear storage compartment trim.
5. Program the RKE module. Testing and Inspection