Navigation Radio Replacement

REMOVAL PROCEDURE
1. Remove the rear shelf trim panel.
2. Remove the fasteners retaining the radio to the radio bracket.
3. Disconnect the electrical connectors from the radio.
4. Remove the radio from the bracket.

INSTALLATION PROCEDURE
1. Install the radio to the bracket.
2. Connect the electrical connectors to the radio.

NOTE: Refer to Fastener Notice in Cautions and Notices.

3. Install the fasteners to the radio and bracket assembly.

Tighten
Tighten the radio fasteners to 5 N.m (44 lb in).

4. Install the rear shelf trim panel.