Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Vehicle Speed Sensor: Service and Repair

Removal Procedure





1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the electrical connector from the speed sensor.
3. Remove the speed sensor attaching bolt (46).
4. Remove the speed sensor (45) and the seal (44). Use hand pressure to rotate the sensor back and forth while pulling outward. Do not pry on the sensor.

Installation Procedure





1. Install the speed sensor (45) and the seal (44).
2. Install the speed sensor attaching bolt (46).

Notice: Refer to Fastener Notice in Service Precautions.

^ Tighten the speed sensor bolt to 9 Nm (78 inch lbs.).
3. Connect the electrical connector to the speed sensor.
4. Lower the vehicle.