Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Inflatable Restraint Side Impact Sensor Replacement





REMOVAL PROCEDURE
1. Disable SIR system.
2. Remove front door trim panel.
3. Remove front door water deflector.
4. Disconnect inflatable restraint Side Impact Sensor (SIS) wiring harness connector.
5. Remove the two Torx(R) screws.
6. Remove the SIS from the mounting plate.

INSTALLATION PROCEDURE
1. Install the SIS to the mounting plate.
2. Install the two Torx(R) screws.

Tighten
Tighten Inflatable restraint side impact screws to 5 N.m (45 lb in).

3. Connect the SIS wiring harness connector.
4. Install front door water deflector.
5. Install front door trim panel.
6. Enable SIR system. Refer to Enabling the SIR System.